English
Language : 

408-10390 Datasheet, PDF (1/18 Pages) TE Connectivity Ltd – Ocean side-feed applicators are available with either a mechanical feed, air feed, or servo feed system
Indicator Notch/CutOut
Ram Assembly
Ocean End-Feed Applicators
Mechanical Feed Applicator
Wire Crimp Disc
Instruction Sheet
408-10390
14 NOV 16 Rev M1
Terminal Feeder Assembly
Applicator Housing
Insulation Crimp Dial
End-Feed Strip-Form
Terminal Strip
Drag Release Lever
Stripper
Lead Terminal (Ref)
Strip Guide Block
Strip Guide Plates
Base Plate
Anvil
Figure 1
1. INTRODUCTION
Ocean side-feed applicators are available with either a mechanical feed, air feed, or servo feed system. Each
applicator accepts the end-feed strip-form of terminals identified on the applicator parts list and exploded view
drawing (applicator log) to apply to pre-stripped wires.
NOTE
Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.
This instruction sheet, parts list, exploded-view drawing (packaged with applicator), and applicable terminating
machine manual provide all the information required to operate and maintain the applicator and machine.
NOTE
Terminating machine manuals are:
409-5128 Basic AMP-O-LECTRIC* machine
409-5207 or 409-5289 Model “T” terminating unit
409-5842 Model “G” machine
409-10047 AMP 3K* machines 1725950-[ ] and AMP 5K* machines 1725900-[ ]
409-10099 AMP 3K/40* machines 2119683-[ ] and AMP 5K/40* machines 2119684-[ ]
NOTE
The reasons for re-issue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
NOTE
Reference Instruction Sheet 408-35008 for translations of the Safety Warnings specified herein.
2. DESCRIPTION
Main components of the mechanical and air feed applicators are identified in Figures 1 and 2, respectively.
© 2016 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 18