1VK1 Datasheet, PDF (1/5 Pages) Tyco Electronics – General Purpose RFI Power Line Filters-Ideal for High Impedance Load

K Series
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
General Purpose RFI Power Line Filters – Ideal for High Impedance Load
UL Recognized
CSA Certified
VDE Approved**
VK6
VK7 / EK7
1
K Series
• Suitable for high impedance loads
• Well suited to applications where pulsed,
continuous and/or intermittent RFI interference
is present
• EK models meet the very low leakage current
requirements for VDE portable equipment and
non-patient care medical equipment
• Available with ground line inductor (choke)
Ordering Information
10 E K 7 M
Suffix
M – Metric inserts (style 7 only)
Omit for standard or none
C – Ground choke (30, 40VK6 only)
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
7 – IEC inlet* (line side)
.250 [6.3] spade terminals
(load side)
K Series
Leakage current designation
E – Low leakage (<0.5 mA)
V – Standard
Current Rating
1, 2, 3, 5, 10, 20, 30, 40 or 60A
VK1 / EK1
VK3 / EK3
Specifications
Maximum leakage current each Line to Ground:
VK Models
EK Models
@ 120 VAC 60 Hz:
.5 mA
.21 mA
@250 VAC 50 Hz:
1.0 mA
.36 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 60A*
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Available Part Numbers
1VK1
10VK6
1VK3
10VK7
2VK1
10VK7M
2VK3
20VK1
3VK1
20VK6
3VK3
20VK7*
3VK7
30VK6
3VK7M
30VK6C
5VK1
40VK6
5VK3
40VK6C
5VK7
60VK6
5VK7M
1EK1
10VK1
1EK3
10VK3
2EK1
2EK3
3EK1
3EK3
3EK7
3EK7M
5EK1
5EK3
5EK7
5EK7M
10EK1
10EK3
10EK7
10EK7M
20EK1
*1-15A: IEC 60320-1 C14 inlet mates with C13 connector
20VK7: C20 inlet mates with C19 connector
**20VK7, 20A model tested by Underwriters Laboratories
to US and Canadian requirements and is
VDE approved at 16A, 250VAC
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
49
For email, phone or live chat, please go to
te.com/help
corcom.com