17P Datasheet, PDF (1/2 Pages) TE Connectivity Ltd – Spindle Operated Potentiometers

Spindle Operated Potentiometers
Key Features
I Polymer thick film
element
I Switch versions available
I Dual gang version
available
I High reliability
I Small versatile size
I All plastic body
I Plastic spindle
I Flame retardant
Type 17P Series
Applications
I Audio
I Industrial controls
I Lighting
I Appliances
Specify the type 17P for applications where high insulation resistance and voltage proof are
key requirements. The materials used in the all plastic body and spindle construction are UL
approved making it a suitable component for domestic appliances and control systems
where safety is of prime importance. This popular low cost potentiometer is suitable for
industrial and professional applications. A range of approved switches can be added to the
rear of the potentiometer, to produce rotary or push-push action mains switches.
Characteristics - Electrical
Resistance Range:
Resistance Value:
Resistance Tolerance:
Rated Dissipation at 20°C:
Limiting Element Voltage:
Electrical Rotation:
Terminal Resistance:
Noise (ENR):
Insulation Resistance:
Voltage Proof:
1K to 1M (linear), 4K7 to 470K
(non linear)
1, 2.2 and 4.7 in each decade
± 20% (10% by selection)
0.25W (linear), 0.125W (non linear)
350V DC or AC (rms)
267° without switch, 232° with switch
5Ω, maximum
2% maximum (linear), 3% maximum
(non linear)
4GΩ, minimum
1kV AC peak
Characteristics - Environmental
Limits of Resistance Change:
Temperature Characteristics
of Resistance:
Bump Severity:
Vibration Severity:
Climatic Category:
Mechanical Endurance:
15% (after 1000hrs. endurance)
5% (20°C to 70°C)
390m/s², 4000 bumps
10 - 500Hz, 0.75 mm or 98M/s²
25/70/04
20000 operations (minimum)
Characteristics - Mechanical
Operating Torque:
Mechanical Rotation:
End Stop Torque:
15mNm maximum
300° nominal
350mNm maximum
Characteristics - Switch
Switch Type:
Current/Voltage Rating:
On/Off Torque:
Initial Contact Resistance:
Contact Gap:
B&D
1A
1.0A - 24V DC
0.3A - 250V AC
40mNm maximum
20mΩ
3mm
A& E
4A
10A - 12V DC
4A - 250V AC
40mNm maximum
20mΩ
3mm
P
10A
10A - 250V AC
Life - 25,000 cycles minimum
Proof Voltage - 3kV minimum
1773176 CIS BI 11/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to: te.com/help