|
1210-1PSI Datasheet, PDF (1/7 Pages) TE Connectivity Ltd – PC Board Mountable Pressure Sensor | |||
|
1210
1psi
SPECIFICATIONS
ï· PC Board Mountable Pressure Sensor
ï· 0-100 mV Output
ï· Current Excitation
ï· Gage and Differential
ï· Temperature Compensated
The 1210 1psi is a temperature compensated,
piezoresistive silicon pressure sensor packaged in a dual-in-line
configuration. It is intended for cost sensitive applications where
excellent performance and long-term stability are required.
Integral temperature compensation is provided over a
range of 0-50°C using laser-trimmed resistors. An additional
laser-trimmed resistor is included to normalize pressure
sensitivity variations by programming the gain of an external
differential amplifier. This provides sensitivity interchangeability
of ±1%.
Please refer to the 1210 standard datasheet for
information on products with operating pressures greater than
1psi. For voltage excitation, please refer to the Model 1220.
SENSOR SOLUTIONS /// 1210
9/2015
Page 1
|
▷ |