English
Language : 

114-9014 Datasheet, PDF (1/18 Pages) TE Connectivity Ltd – Eurocard Connectors Types B, C, M, Q, R, and Enhanced Type C
Eurocard Connectors Types B, C, M, Q,
R, and Enhanced Type C
(Board- to- Board Application)
Application Specification
114- 9014
18 JUN 12 Rev K
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers requirements for the printed circuit (pc) board--to--board application of Eurocard
Connectors Types B, C, M, Q, R, and Enhanced Type C. These two--piece, 2.54 mm [.100 in.] row--to--row and
in--row centerline contact connectors are designed to mate with all DIN 41612 and IEC 603--2 connectors of
similar type and contact arrangement. The two-- and three--row connectors are available in 32, 64, and 96
positions, as well as half sizes and expanded sizes as mating pin and receptacle connectors.
The housings are available pre--loaded with ACTION PIN* thin stock and square stock contacts (0.64 mm
[.025 in.]), solder tines and wrap--type contacts in various lengths. Type M housings have contact cavities at
each end that will accept solder cup, coaxial crimp--type, and solder type contacts. Multiple pin heights for
connectors with make first, break last (MFBL) contacts and selective contact loading are available.
When corresponding with TE Connectivity Personnel, use the terminology provided in this specification to
facilitate your inquiries for information. Basic terms and features of these components are provided in Figure 1.
Row B Row A
Row C
Type C
Receptacle
Connector
Mounting
Ear
Polarizing
Bar
Housing
Socket
Contacts
ACTION PIN
Thin Stock Contact
Ribbing
Standoff
Polarizing
Indent
Pin
Hood
Pin
Contact
Type R Receptacle
Connector
Boardlock
Solder Tine
Type C Pin Connector
ACTION PIN 0.64 mm
[.025 in.] Square Stock
Contact
Figure 1 (cont’d)
Wrap- Type
Contact
Type R Pin Connector
E2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111
All Rights Reserved
PRODUCT INFORMATION 1--800--522--6752
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
1 of 18
For latest revision and Regional Customer Service,
visit our website at www.te.com
LOC B