114-6041 Datasheet, PDF (1/10 Pages) TE Connectivity Ltd – This specification covers the requirements for application of CHAMP Cable Connectors

CHAMP*
Cable Connectors
(Standard and Shielded)
Application Specification
114- 6041
25 APR 11 Rev B
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of CHAMP Cable Connectors (standard and
shielded). These requirements are applicable for hand or automatic machine installation. These CHAMP Cable
Connectors are intermateable and interchangeable with existing connectors of a similar design. The CHAMP
Connector product line is ideally suited for use in all phases of the telecommunications industry, computer
terminals, test equipment, business and copying machines, telemetering, and various equipment used in the
security industry. The standard CHAMP Cable Connectors are available in 14--, 24--, 36--, 50--, and 64--position
sizes. The shielded CHAMP Cable Connectors are available in 24--, 36--, and 50-- position sizes.
When corresponding with TE Connectivity personnel, use the terminology provided in this specification to
facilitate your inquiries for information. Basic terms and features of this product are provided in Figure 1.
Receptacle Connector
Assembly
Plug Connector
Assembly
Contact Letter Code
Standard CHAMP
Connector
Housing Color Dot Code
(on back of plug and
receptacle connector)
Locking Tabs
Shielded CHAMP
Connector
Figure 1
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
visit our website at www.te.com
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
1 of 10
LOC B