114-16017 Datasheet, PDF (1/12 Pages) TE Connectivity Ltd – Mini-Universal MATE-N-LOK Connectors

Mini- Universal MATE- N- LOK* Connectors
Application Specification
114- 16017
17 MAR 11 Rev L
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of Mini--Universal MATE--N--LOK connectors for
free--hanging, panel--mount, and printed circuit (pc) board applications. These connectors provide a reliable
and economic means of grouping multiple--lead connections in computers, computer/peripheral equipment,
business machines, entertainment centers, and appliances.
The connectors are available in hermaphroditic housing and positively polarized: plug housing, vertical pin
header, right--angle pin header, and cap housing. The housings accept socket contacts and pin contacts.
Each contact features a contact stop to ensure proper insertion depth of the contact in the contact cavity of the
housing. The contacts are available in strip form for machine application and loose piece for manual tooling
application.
The hermaphroditic housing is available with 2, 3, or 4 circuits for free--hanging applications. The cap housing
is available in 1, 2, or 3 circuits for free--hanging application and 2, 3, 4, 6, 9, 12, or 15 circuits for panel
mounting or free--hanging application.
The plug housing and vertical pin header is available with 2, 3, 4, 6, 8, 9, 10, 12, 14, 15, 16, 18, 20, 22, or 24
circuits; the vertical blind--mate pin header is available in 4, 6, 8, 9, 10, 12, or 15 circuits for panel mounting or
free--hanging application. The right--angle pin header is available in 2, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, or
24 circuits for pc board application.
DANGER ^{To avoid personal injury, these connectors are not to be used for interrupting current.}
When corresponding with personnel, use the terminology provided in this specification to facilitate your
inquiries for information. Basic terms and features of this product are provided in Figure 1.
Hermaphroditic Housing
Locking
Tab
Locking
Latch
Plug Housing
Locking
Latch
Vertical Pin Header
Right- Angle Pin Header
Locking
Tab
Cap Housing
Standoff
Boardlock
Solder
Tine
Socket Contact
Insulation
Barrel
Solder
Tine
Pin Contact
Mounting
Ear
Contact
Stop
Figure 1
Wire
Barrel
Locking
Lance
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
1 of 12
For latest revision and Regional Customer Service,
visit our website at www.te.com
LOC B