114-13033 Datasheet, PDF (1/7 Pages) TE Connectivity Ltd – AUGAT HOLTITE Sockets

AUGAT* HOLTITE* Sockets
Application Specification
114- 13033
14 MAR 11 Rev B
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of AUGAT HOLTITE Sockets. These manually
applied or reel--mounted machine applied solderless spring sockets are designed to be contained within the
barrel of a plated--through hole. The design allows the socket and plated--through hole to form a zero--profile
component socket which provides an interconnect for a broad range of electronic parts and components. The
sockets are available in a variety of different series and sizes based on printed circuit (pc) board hole diameter.
They are also available normally on mylar strips which can be reeled on custom socket patterns for ease of
application.
When corresponding with TE Connectivity (TE) Personnel, use the terminology provided in this specification to
facilitate your inquiries for information. Basic terms and features of this product are provided in Figure 1.
Entry Area
Groove
Locking Collar
Transition Region
Fingers
Figure 1
2. REFERENCE MATERIAL
2.1. Revision Summary
S Updated document to corporate requirements
S New logo
2.2. Customer Assistance
Reference Part Number 6--1437514--7 and Product Code E354 are representative numbers of AUGAT
HOLTITE Sockets. Use of these numbers will identify the product line and expedite your inquiries through a
service network established to help you obtain product and tooling information. Such information can be
obtained through a local TE Representative or, after purchase, by calling the Tooling Assistance Center or
Product Information number at the bottom of this page.
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111
All Rights Reserved
PRODUCT INFORMATION 1--800--522--6752
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 7
LOC B