114-1008 Datasheet, PDF (1/11 Pages) TE Connectivity Ltd – Printed Circuit (PC) Board Pins and Disconnect Receptacle Contacts

.058 and .093 Diameter
Printed Circuit (PC) Board Pins and
Disconnect Receptacle Contacts
Application Specification
114-1008
16 DEC 16 Rev K1
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and
illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of .058 and .093 diameter pc board pins and
disconnect receptacle contacts. The pins are available in solid or formed press-fit and clinch fit. The pins
feature a pin body, bead, and cutoff tab. The bead ensures proper insertion depth of the pin when inserted into
the pc board. The clinch fit pin has legs that clinch the pc board for stability. The receptacle contact features a
wire barrel with serrations, insulation barrel, and mating barrel. The pin must be soldered to the pc board and
the receptacle contact must be crimped onto wire. The pin and receptacle contact mates for quick disconnect of
single-circuit wire-to-board connections.
The pins and receptacle contacts are available in loose pieces for application using hand tools and strip form
for application using semi-automatic and automatic machines.
When corresponding with personnel, use the terminology provided in this specification to facilitate inquiries for
information. Basic terms and features of this product are provided in Figure 1.
Press-Fit Pin
Pin Body
Bead
Clinch Fit Pin
Legs
Cutoff Tab
Mating
Barrel
Insulation
Barrel
Wire Barrel
with Serrations
Receptacle Contact
Wire Barrel
with Serrations
Figure 1
2. REFERENCE MATERIAL
2.1. Revision Summary
Revisions to this application specification include:
Updated specification to corporate requirements
Added “max” to dimension for front bellmouth, and corrected wire sizes in Paragraph 3.6
Modified documents in Paragraph 2.5, and modified tooling in Section 5
2.2. Customer Assistance
Reference Product Base Part Number 61137 and Product Code 1330 are representative of .058 and .093
diameter pc board pins and disconnect receptacle contacts. Use of these numbers will identify the product line
and help you to obtain product and tooling information. Such information can be obtained through a local
Representative, by visiting our website at www.te.com, or by calling PRODUCT INFORMATION or the
TOOLING ASSISTANCE CENTER at the numbers at the bottom of this page.
© 2016 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 11