114-10011 Datasheet, PDF (1/11 Pages) TE Connectivity Ltd – Audio/Microphone Connectors

Audio/Microphone Connectors
Application Specification
114- 10011
18 Mar 11 Rev C
NOTE
i
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
inches]. Unless otherwise specified, dimensions have a tolerance of +0.13 [+.005] and angles have a tolerance of +2_.
Figures and illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for the application of Audio/Microphone Connectors. The connectors
are designed to accept a wire size range of 18 through 28 AWG and are available in 4, 5, or 6 position. The
receptacle connector is panel mounted. Application may be done by machine for reel--mounted contacts and
by hand for replacement loose piece contacts.
‘When corresponding with TE Personnel, use the terminology provided on this specification to help facilitate
your inquiry for information. Basic terms and features of components are provided in Figure 1.
Polarizing Rib
(On Mating Face)
Engagement
Groove
Strain Relief
Collets
Socket Contact
Mounting Fins
Locking Latch
Antirotation
Key
Locking Collar
Front (Ref)
Polarizing
Groove
Plug Insert
Alignment
Groove
Pin Contact
Locking Tab
Numbered
Contact
Cavities
Locking Tab
Entry Slot
6- Position Receptacle
Housing (Typ)
Latch Slot
Detent
Figure 1
Plug Body
Flexible Cable Guard
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111
All Rights Reserved
PRODUCT INFORMATION 1--800--522--6752
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
*Trademark. Other logos, product and/or Company names may be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 11
LOC B