CS11ZU2GA472MAGKA Datasheet, PDF (9/9 Pages) TDK Electronics – High Voltage Ceramic Capacitors Automotive Grade, Safety Standard Approved

(9/9)
CAPACITORS
CS Series
TAPING DIMEMSIONS
P
D
P2
T
Δh
Δh
S
P1 F
P0
D0
ød
Item
Body diameter
Body thickness
Lead-wire diameter
Pitch of component
Feed hole pitch
Feed hole center to lead
Feed hole center to component center
Lead-to lead distance
Component alignment
Tape width
Adhesive tape width
Hole position
Adhesive tape position
Bottom of kink from tape center
Height of body from tape center
Lead-wire protrusion
Feed hole diameter
Total tape thickness
Length of snipped lead
Coating on lead
Height of kink
Spring action
Symbol Dimensions(mm)
Remarks
D
Depends on the specification of each product.
T
Depends on the specification of each product.
ød
0.6±0.05
P
15.0±1.0
Including the slant of body
P0
15.0±0.3
Excepting the tape splicing part
P1
3.75±0.7
P2
7.5±1.3
F
7.5±0.8
Measuring point is bottom kink
'h
0±2.0
Including the slanting body due to bending lead-wire
W
18.0+1.0, –0.5
W0
10.0min.
W1
9.0±0.5
W2
4.0max.
Adhesive tape do not stick out the tape
H0
16.0+1.5, –0.5
H1
46.0max.
1.0max.
D0
4.0±0.2
t
0.6±0.3
Including adhesive tape
L
11.0max.
C
4.0max.
A
4.0max.
Measuring point is bottom kink
S
2.0max.
AMMO PACK INNER BOX SIZE
340max.
60max.
Dimensions in mm
• For more information about products with other capacitance or other data, please contact us.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160219 / leaddisc_automotive_cs_en.fm