|
B3533 Datasheet, PDF (4/11 Pages) TDK Electronics – SAW Components SAW Diplexer Short range devices | |||
|
◁ |
SAW Components
SAW Diplexer
Data sheet
Characteristics Channel 3
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
B3533
433.20 / 434.64 MHz
T = â40 ËC to +85 ËC
ZS = 50 ⦠and matching network
ZL = 50 ⦠and matching network
Center frequency
min.
typ.
max.
@ 25 ËC
fC
â
433.20
â MHz
Minimum insertion attenuation
αmin
incl. loss in matching elements (QL = 42)
â
2.3
3.0 dB
excl. loss in matching elements
â
2.0
2.7 dB
Pass band (relative to αmin)
433.14 ... 433.26 MHz
â
0.5
1.5 dB
433.11 ... 433.29 MHz
â
1.0
3.0 dB
Relative attenuation (relative to αmin) αrel
10.00 ... 410.00 MHz
52
58
â dB
410.00 ... 427.00 MHz
45
51
â dB
427.00 ... 431.40 MHz
25
31
â dB
431.40 ... 432.30 MHz
15
21
â dB
433.80 ... 434.50 MHz
434.50 ... 443.00 MHz
443.00 ... 500.00 MHz
500.00 ... 2500.00 MHz
10
16
â dB
27
33
â dB
42
48
â dB
52
58
â dB
Impedance for pass band matching1)
Input: ZIN = RIN || CIN
Output: ZOUT = ROUT || COUT
â
460 || 2.1
â ⦠|| pF
â
490 || 1.3
â ⦠|| pF
1) Impedance for passband matching bases on an ideal, perfect matching of the SAW filter to source- and to load
impedance (here 50 Ohm). After removal of the SAW filter the input impedance of the input and output match-
ing network is calculated. The conjugate complex value of these characteristic impedances are the input and
output impedances for flat passband. For more details we refer to EPCOS application note #4.
Please read cautions and warnings and
important notes at the end of this document.
4 December 20, 2012
|
▷ |