DEA202450BT-7041E1 Datasheet, PDF (3/5 Pages) TDK Electronics – Multilayer Balanced Band Pass Filter

[LAND PATTERN (TDK Recommended)]
2.60 mm
0.60 mm
1.95 mm
0.35 mm
0.55 mm
0.20 mm
0.35 mm
0.65 mm
Fig 3
Note1: Pin 2 of the filter provides a DC feed connection to the balanced ports. In the event that this
function is used, Pin 2 should be connected to ground using a 15pF de-coupling capacitor.
Note2: In the event that the pin 2 function is not used, the pin should be left unconnected.
[PCB TOP METAL LAYER]
BAL
1.13m₀^m_.1mm
W
0.707mm _{W 0.1mm BAL}
0.8mm
UNBAL
W 0.19mm
Exposed copper areas
Ground Plane
Ground Via
Routing Via
PCB Parameters:
Lower layer trace
DC feed capacitor
Material: FR4
Top metal to GND layer height: 0.1mm
DC feed cap value: 15pF
Fig 4
DEA202450BT-7041E1
All specifications are subject to change without notice.
Feb 2007 Ver. 12b