B44066T0200E402 Datasheet, PDF (3/7 Pages) EPCOS – Thyristor Module TSM-LC200

Film Capacitors – Power Factor Correction
Thyristor Module TSM-LC for Dynamic PFC
B44066T0200E402
TSM-LC200
Technical data and specifications
Dimensions
Weight
Rated voltage
Maximum voltage
- in conventional PFC-systems (without reactors)
- in detuned PFC-systems (7 % detuning)
- in detuned PFC-systems (14 % detuning)
Auxiliary supply
Frequency
Switching capability
Activation
Switching time
Reset time
Display
Power circuit
Power dissipation
Fuses (mandatory for protection of components)
Ambient operating temperature at nominal load
250 x 480 x 160 mm (w x h x d)
11.5 kg
380 … 400 V
440 V
440 V (no upwards tolerance permitted)
400 V
230 V AC
50/60 Hz
Max. 200 kvar at 400 V
10…24 V DC (approx. 20 mA) via terminal
clamp, internally electrically isolated
Approx. 5 ms
Depending on degree of detuning and dimension
of discharge resistor
2 status LEDs per phase: operation/fault and
triggering signal
Direct connection 4 pole via busbar (cable lug
max.
185 mm², D = 12 mm), connection from the top
P_D (in W) = 2,0 x I (in A) ; at 400 V/200 kvar
approx.
580 W thermal
3 x electronic fuse „superfast“
NH2 AC 690V, characteristic gRL
125 kvar: 315 A (e.g. SIBA Art.Nr.
20.212.20.315)
150 kvar: 350 A (e.g. SIBA Art.Nr.
20.212.20.350)
200 kvar: 450 A (e.g. SIBA Art.Nr. 20 212.
20.450)
–10 °C … +55 °C
FILM PFC PM
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 7
August 2010