B32332 Datasheet, PDF (3/8 Pages) TDK Electronics – Film Capacitors – AC Capacitors Motor run capacitors

Film Capacitors – AC Capacitors
Motor run capacitors
B32330 / B32332
450 V
Maximum ratings
Maximum permissible voltage V_max
Maximum permissible current I_max
Test data
AC test voltage terminal to terminal V_TT
1.1  V_R
1.3  I_R
(V_R = Rated voltage)
(I_R = Rated current)
2.0  V_R, 2 s (routine test)
2.0  V_R, 60 s (type test)
AC test voltage terminal to can V_TC
2 kVAC, 2 s (routine test)
2 kVAC, 60 s (type test)
Insulation resistance R_ins or time constant
at +20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
3000 s
Dissipation factor tan δ at +20 °C
≤7 10^-3 (1 kHz)
Maximum rate of voltage rise dV/dt_max
10 V/µs
Climatic data
Climatic category
25/085/21 to IEC 60068-1
Lower category T_min
-25 °C
Upper category T_max
+85 °C
Damp heat test t_test
21 days
Mechanical and thermal properties of terminal insulator material
Ball pressure test to IEC 60309-1 sec. 27.3
At +125 °C
Plastic can and top disk material
UL 94 V2 minimum
 UL 94 V2/V0 compatible
 Glow wire test to IEC60335-1 / IEC 60695-2-1/1
Test temperature +750 °C
 Part is compatible to EN 60335-1
Self-extinguish within 2 seconds of withdrawing
glow wire without igniting wrapping tissue of GWT
 Tracking test to IEC 60112 solution A
Compatibility to RoHS
> 250 V
Compliance to directive 2011/65/EU
Approvals: see table for approved ratings
UL 810 E106388
C
US
VDE EN 60252-1
Approved component 10000 AFC, protected
up to 450 V
Approved up to 20 uF, 450 V / +85 °C : 30000 h
(Class A)
CAP FILM T RD PD AC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 8
July 2016