PS65 Datasheet, PDF (2/4 Pages) Astrodyne Corporation – 65W Single Output Switching Power Supply

65W Single Output Switching Power Supply
PS65 series
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range
Inrush Current, typ: (cold start)
Input Current

Leakage current
Min Load
90 ~ 264VAC 127~370 Volts(DC)
47-440Hz
20Amps/115VAC; 40Amps/230VAC
1.2 Amps@115VAC
0.72 Amps@230VAC
< 0.5mAmps / 240VAC
See Selection Chart
OUTPUT SPECIFICATIONS
Voltage and Current
Line Regulation
Load Regulation
Voltage Tolerance (Note 2)

Ripple/Noise (Note 1)

Hold Up Time @ FL
Setup, Rise Time @ FL
Over Voltage Protection

Over Current Protection




DC Voltage Adjust
See Selection Chart
±1.0%
See Selection Chart
3.0%: 3.3~7.5Volts(DC)
2.0%: 12~48Volts(DC)
80mVpk-pk: 3.3Volts(DC)
100mVpk-pk: 5~48Volts(DC)
60mS
800mS, 20mS
See Selection Chart
Hiccup mode, auto recover
3.3Volts: 36~55W
5Volts: 70~105W
7.5~48Volts: 73~105W
rated output power
Hiccup mode, auto recover
See Selection Chart
GENERAL SPECIFICATIONS
Harmonic Current
Compliance to EN61000-3-2,-3
Efficiency
See Selection Chart
Isolation

3000VAC Input - Output

1500VAC Input - Ground

500VAC Output - Ground
EMS
Compliance to

EN61000-4-2,3,4,5,6,8,11

ENV50204, ENV55024

light Industry Level, Criteria A
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
-10°C to +60°C (See Derate Curve)
Storage Temperature
-20°C to +85°C, 10~95% RH
Relative Humidity
20~90% RH non cond
Temperature Coefficient ±0.04% / °C (0-50°C)
MTBF
300.7KHrs min,MIL-HDBK-217F(25°C)
Vibration
10~500Hz, 2G10min./1cycle, period for

60min. each along X, Y, Z axes
PHYSICAL SPECIFICATIONS
Size
Weight
127 x 76 x 42 mm (5”x 3”x 1.65”)
7.41 oz (210g)
NOTE
1. Ripple & noise are measured at 20MHz of bandwidth by using a 12”
twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Tolerance : includes set up tolerance, line regulation and load regula-
tion.
3. Mounting holes M1 and M2 should be grounded for EMI purposes.
Safety

Insulation Resistance
EMI

UL60950,
TUV EN60950-1 Approved
≥ 100MΩ / 500Volts(DC)
Compliance to EN55022 (CISPR22)
Class B
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458