B41887_16 Datasheet, PDF (15/27 Pages) TDK Electronics – Aluminum electrolytic capacitors

B41887
Long useful life  105 °C
PAPR leads (Protection Against Polarity Reversal)
These lead configurations ensure correct placement of the capacitor on the PCB with regard to
polarity. PAPR leads are available for diameters from 10 mm up to 18 mm (excluding
d × l = 12.5 × 30/35/40 mm).
There are three configurations available: Crimped leads, J leads, bent 90° leads.
Crimped leads
Last 3 digits of ordering code: 003
With stand-off rubber seal
With flat rubber seal
Suggestion for PCB hole diameter
Case size
d × l (mm)
16 × 20
16 × 25
16 × 31.5
16 × 35.5
18 × 20
18 × 25
18 × 31.5
18 × 35
18 × 40
Dimensions (mm)
B ±0.2 C ±0.5
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
1.5
3.0
D ±0.1
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
E ±0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
a ±0.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
∅b
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.05
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 27