B43741_16 Datasheet, PDF (11/22 Pages) TDK Electronics – Aluminum electrolytic capacitors

B43741, B43761
Extra long useful life  105 °C
Technical data and ordering codes
C_R
100 Hz
20 °C
μF
Case
dimensions
d×l
mm
ESR_typ
100 Hz
20 °C
mΩ
ESR_typ
300 Hz
60 °C
mΩ
Z_max
10 kHz
20 °C
mΩ
I_AC,max
100 Hz
60 °C
A
I_AC,max
100 Hz
85 °C
A
I_AC,R
100 Hz
105 °C
A
Ordering code
(composition see
below)
V_R = 350 V DC
1800 51.6 × 80.7 60 17
2200 51.6 × 96.7 50 14
2700 51.6 × 105.7 40 11
2700 64.3 × 80.7 40 12
3300 51.6 × 130.7 32
9.3
3300 64.3 × 96.7 32
9.5
3900 64.3 × 105.7 28
8.2
4700 64.3 × 130.7 24
6.8
4700 76.9 × 96.7 24
7.3
5600 64.3 × 130.7 20
6.1
5600 76.9 × 118.2 20
5.9
6800 76.9 × 130.7 16
5.1
6800 90.0 × 120.0 16
4.8
8200 76.9 × 143.2 14
4.4
8200 90.0 × 120.0 14
4.2
10000 76.9 × 168.7 11
3.7
10000 90.0 × 144.5 11
3.5
12000 76.9 × 190.7 9.5 3.2
12000 90.0 × 144.5 9.5 3.2
15000 76.9 × 220.7 7.7 2.7
15000 90.0 × 170.0 7.6 2.6
18000 90.0 × 197.0 6.4 2.3
95 15.4 11.4 6.41 B437*1A4188M0##
75 18.1 13.4 7.54 B437*1A4228M0##
65 20.8 15.4 8.66 B437*1A4278M0##
65 21.0 15.6 8.75 B437*1B4278M0##
50 24.1 17.9 10.0 B437*1A4338M0##
50 23.9 17.8 9.97 B437*1B4338M0##
45 26.7 19.8 11.1 B437*1A4398M0##
36 30.3 22.5 12.6 B437*1A4478M0##
36 31.2 23.2 12.9 B437*1B4478M0##
32 34.0 25.2 14.1 B437*1A4568M0##
30 35.0 26.0 14.6 B437*1B4568M0##
26 39.5 29.3 16.4 B437*1A4688M0##
26 42.6 31.7 18.3 B437*1B4688M0##
22 44.5 33.0 18.5 B437*1A4828M0##
22 47.4 35.2 20.3 B437*1B4828M0##
18 50.8 37.7 21.8 B437*1A4109M0##
18 53.5 39.8 23.0 B437*1B4109M0##
16 57.6 42.8 24.7 B437*1A4129M0##
16 59.7 44.3 25.6 B437*1B4129M0##
13 67.0 50.1 29.0 B437*1A4159M0##
13 69.0 51.2 29.5 B437*1B4159M0##
11 77.9 57.9 33.1 B437*1A4189M0##
Composition of ordering code
* = Mounting style
4 = for capacitors with ring clip/clamp mounting
6 = for capacitors with threaded stud
## = Design
00 = for standard capacitors
03 = for capacitors with low inductance (13 nH)
(only for d ≥ 64.3 mm and rated voltage
≤ 400 V DC)
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
(not for low inductance)
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud, not for low inductance)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 22