ZJSR Datasheet, PDF (1/4 Pages) TDK Electronics – 3-TERMINAL FILTERS FOR SIGNAL LINE AND DC POWER LINE LEAD(ROUND)

EMC Components
ZJSR Series
3-Terminal Filters for Signal Line and DC Power Line
Lead(Round)
(1/4)
001-01 / 20030823 / e9632_zj.fm
FEATURES
• The ZJSR series combine TDK’s high performance ferrite bead
and a chip capacitor. This board mounted EMC filter is used to
prevent microcomputer operational errors and stop noise
generation. Most suitable for use in countering radio noise
generated by digital circuits.
• SIP shape with 2.4mm max. thickness, making possible high
density mounting upon a PCB in a row at DIP pitch.
• When using taped product, possible to mount using automatic
equipment.
• Excellent high frequency bypass performance due to short
earth-side capacitor lead.
PRODUCT IDENTIFICATION
ZJSR5101 - 101 TA
(1)
(2) (3)
(1)Series name
(2)Capacitance 101:100pF
(3)Packaging style TA: Taping
(not needed for specification of bulk products)
SHAPES AND DIMENSIONS
TAPING SPECIFICATIONS
Marking
A1
P
T
∆h
∆h
APPLICATIONS
Home electronic equipment, (TVs, VCRs, CD players, DAT play-
ers, electric musical instruments, PCs, etc.), office automation
equipment (computers, terminals, stand-alone word processors,
fax machines, etc.), factory automation equipment (robots, numeri-
cal control devices, process controllers, etc.), automotive electron-
ics (automotive engine control units, etc.)
BASIC CHARACTERISTICS
Series
Rated voltage Edc
Rated current
Withstand voltage Edc
[Between terminal, No.1, 3 to 2]
Insulation resistance
[DC. 50V for 1 min]
DC resistance[Terminal No.1 to 3]
Operating temperature range
ZJSR
50V
5A
125V
10000MΩ min.
0.05Ω max.
–25 to +85°C
• This product should not be used under conditions that exceed those
listed above.
• Please note that this product is an EMC filter, so should not be used as a
surge absorber, etc.
ød2
(P1)
ød2
ød1
P0 F1
BULK SPECIFICATIONS
F2
øD0
CIRCUIT DIAGRAM
Bead cores
1
2 _f1f2
3
1
3
Chip capacitor
TYPICAL MOUNTING EXAMPLE
2.54mm pitch
2 2: Ground terminal
ZJSR series
IC LSI
Dimensions in mm
Series
ZJSR
Component width
Component height
A1
8.5max.
A
8max.
Component thickness
T
2.4max.
Lead wire diameter
(round)
Component pitch
ød1
0.5±0.05
ød2
0.6±0.05
P
12.7±1
Feed hole pitch
Feed hole position error
Lead pitch
Component alignment
Tape width
P0
P1
F1, F2
∆h
W
12.7±0.3
6.35±0.4
2.5+0.4, –0.1
0±2
18+1, –0.5
Cover tape width
Feed hole position error
Cover tape position
Component bottom position
W0
W1
(W2)
H
12±0.3
9±0.5
(4max.)
20±1
Maximum component height H1
Feed hole diameter
øD0
Lead wire protrusion
l1
Lead wire length
l
28max.
4±0.2
0.5max.
5±1.5
Lead pitch
f1, f2
2.5±0.5
• The tolerance of lead pitch is the dimensions when a lead is released
from tape. Not available for bulk packaging.
• All specifications are subject to change without notice.