UCD0J152MNL1GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
U
U
U
U
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 to +105°C
Rated Voltage Range
6.3 to 100V
Rated Capacitance Range
1 to 3300F
Capacitance Tolerance
±20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V)
6.3
10
16
25
tan δ (MAX.)
0.26 0.19 0.16 0.14
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Measurement frequency : 120Hz at 20°C
35
50
63
80
100
0.12 0.10 0.08 0.08 0.07
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
63
80
100
Stability at Low Temperature
Z—25°C / Z+20°C
Impecance ratio
2
2
2
2
2
2
2
2
2
ZT / Z20 (MAX.) ^{Z—40°C / Z+20°C}
3
3
3
3
3
3
3
3
3
Z—55°C / Z+20°C 4
4
4
3
3
3
3
3
3
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 5000 hours (2000 hours for L 10 mm: 50V
or less, and for L 10mm: 63V or more) at 105°C.
Capacitance Change
tan δ
Leakage current
Within ± 30% of the initial capacitance value
200% or less than the initial specified value
300% or less than the initial specified value for 63V or more
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at
20°C, they shall meet the specified values for the endurance characteristics listed above.
Resistance to soldering
heat
Marking
The capacitors are kept on a hot plate for 30 seconds, which is
maintained at 250°C. The capacitors shall meet the characteristic
requirements listed at right when they are removed from the
plate and restored to 20°C.
Capacitance Change
tan δ
Leakage current
Black print on the case top.
Within ± 10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
(φ4 to φ8 × φ6.2)
Voltage ( j : 6.3V )
Series
1 Trade mark
Plastic platform
0.3 MAX.
C ± 0.2
Positive
Lot No.
Capacitance
L±0.3
(φ8 × 10, φ10)
Voltage (E : 25V)
Series
Trade mark
Plastic platform
0.3 MAX.
H
Negative
1: Size φ8 × 6.2 only
Positive
C±0.2
Pressure 2
relief vent
L±0.5
Lot No.
Capacitance
2 : Except : φ10 × 7.7L
(φ12.5 to φ18)
Voltage
Trade mark
Lot No.
Plastic platform
0.3 MAX.
H
C±0.2
Negative
Positive
Pressure
relief vent
L±1.0
H
Negative
Capacitance
Series
φ8 × 10L, φ10 × 10L, φ12.5 × 13.5L, φ16 × 16.5L, φ18 × 16.5L :
The vibration structure-resistant product is also available upon request, please ask for details.
Dimension table in next page.
126
Type numbering system (Example : 16V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UCD 1C 1 0 1 M CL 1 GS
Package code
Size Package Code
φ4 to 10 Taping GS
φ12.5 to 18 Taping MS
φ12.5 to 18 Tray
ZD
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (16V)
Series name
Type
φ D Code
4 to 6.3 CL
8 (6.2L) CL
10(7.7L) CL
8(10L) •
10(10L,13.5L) ^NL
12.5 to 18 NQ
φ D × L _{4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 7.7 10 × 10} (mm)
A
1.8
2.1
2.4
2.4
3.3
2.9
3.2
3.2
B
4.3
5.3
6.6
6.6
8.3
8.3 10.3 10.3
C
4.3
5.3
6.6
6.6
8.3
8.3 10.3 10.3
E
1.0
1.3
2.2
2.2
2.3
3.1
4.5
4.5
L
5.8
5.8
5.8
7.7
6.2
10
7.7
10
H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1
φ D × L _{10 × 13.5 12.5 × 13.5 16 × 16.5 18 × 16.5}
A
3.2
4.8
5.4
6.4
B
10.3 13.6 17.1 19.1
C
10.3 13.6 17.1 19.1
E
4.5
4.0
6.3
6.3
L
13.5 13.5 16.5 16.5
H 0.8 to 1.1 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4
Voltage
V
6.3 10 16 25 35 50 63 80 100
Code
j
A
C
E
V
H
J
K 2A
CAT.8100E