|
PXE2048WD05 Datasheet, PDF (1/2 Pages) TDK Electronics – Single and Dual Output 20W to 30W DC-DC Converters | |||
|
Single and Dual Output 20W to 30W DC-DC Converters
Features
u Industry Standard 2â x 1.6â Footprint
u Six Sided Shielding
u Agency Approved
u 12V, 24V and 48V Inputs
u UL, CSA, EN, CE approvals
u Wide range input
PXE Series
Key Market Segments & Applications
Speciï¬cations
Model
Max Output Power
Voltage Accuracy
Voltage Adjustment
Minimum Load, each output
(1)
Line Regulation
Load Regulation (25% to 100%)
Cross Regulation (25% to 100%)
Ripple and Noise (P-P)
Start up time
Remote on/off
(3)
Temperature Coefï¬cient
Operating Temperature
Maximum Case Temperature
Storage Temperature
Thermal Shock
Relative Humidity (non condensing)
Transient Response (25% step load change)
Overvoltage Protection (Zener clamp
Overcurrent and Short Circuit Protection
Input Surge Voltage (Maximum for 100ms)
Reï¬ected input ripple (peak to peak) (2)
Isolation Voltage
Isolation Resistance
Isolation Capacitance (max)
Typical Switching Frequency (Fixed)
MTBF (BELLCORE TR-NWT-000332)
Vibration
Conducted and Radiated Emissions
Immunity
Safety Agency Approval
Size (L x W x H)
Weight
Warranty
PXE20
PXE30
20W
30W
±2%
±1%
±10%
10%
10%
±0.2% for single, ±0.5% for dual
Single ±0.5%, Dual ±3%
Single ±0.5%, Dual ±1%
Dual ±5%
Single: 75mV; Dual: 100mV
20ms - 1100ms typ.
10 - 25ms typ.
Positive Logic: ON: Open or 3.5-12V, OFF Short or <1.2V
<±0.02%/°C
-40 to +100°C, see derating curve
100°C (Over temperature protection at 115°C - PXE30 model)
-55 to 105°C
MIL-STD-810D
5 to 95%
500us recovery
300us recovery
3.3V: 3.9V, 5V: 6.2V, 12V: 15V, 15V: 18V
Typically at 150%, hiccup with self recovery
12V input: 36V, 24V input: 50V, 48V input: 100V
25mA
30mA
1600VDC minimum (Input-Output, Input-Case)
109 Ohms minimum
300pF
1000pF
300kHz
1,976,000 hours
1,535,000 hours
10 - 55Hz, 2G, 30 minutes each X, Y, Z axis
EN55022 Level A
EN61000-4-2, -3, -4, -5, -6 Pref Criteria 2
IEC60950-1, UL60950-1, EN60950-1, CE Mark (48V input only)
2 x 1.6 x 0.4â
1.69 oz (48g)
Two Year
Notes:
(1) To meet regulation & noise speciï¬cations. Operation at zero load will not damage the device
(2) 12uH source impedance in series with + input
(3) Max sink current 20mA (PXE20), 2.5mA (PXE30); The on/off pin is referenced to the negative input
1-800-526-2324 ⢠www.us.tdk-lambda.com/lp/
165
Disclaimer: us.tdk-lambda.com/lp/legal.htm
|
▷ |