NLV32T-010J-PF Datasheet, PDF (1/3 Pages) TDK Electronics – For General Applications SMD

Inductors
For General Applications
SMD
(1/3)
002-03 / 20031028 / e511_nlv32.fm
NLV Series NLV32 Type
FEATURES
• The product has good heat durability that withstands lead-free
compatible reflow soldering conditions.
• Lead-free material is used for the plating on the terminal.
• The electrical characteristics, reliability, shape and pad shape
are the same as the previous NL series.
• The product uses metal terminals, which realize excellent con-
nection reliability.
• Highly heat resistant thermoplastic resin is used to form the
exterior package.
• From 0.01µH to 470µH, all of the products in the E-12 series are
J(±5%) tolerance products.
• This product conforms to the RoHS standard.
APPLICATIONS
PCs, hard disk drives, and other types of electronics
SPECIFICATIONS
Operating temperature range
Storage temperature range
–40 to +85°C
–40 to +85°C [Unit of products]
RECOMMENDED SOLDERING CONDITIONS
REFLOW SOLDERING
255˚C
230˚C
180˚C
150˚C
10s max.
Natural
cooling
Pre-heating
90 to 120s
40s max.
Time(s)
FLOW SOLDERING
260˚C max.
10s max.
Natural
cooling
170˚C
150˚C
Pre-heating
60 to 120s
PRODUCT IDENTIFICATION
NLV 32 T- 2R2 J - PF
(1) (2) (3) (4) (5) (6)
(1) Series name
(2) Dimensions LxWxT
32
3.2×2.5×2.2mm
(3) Packaging style
T
Taping (reel)
(4) Inductance value
1R0
220
1µH
22µH
(5) Inductance tolerance
J
±5%
(6) Lead-free compatible product
PF
Lead-free compatible product
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
2000 pieces/reel
PRECAUTIONS
• The exterior of this product can melt since due to thermoplastic
construction. During mechanical contact while at the plastic soft-
ening temperature, deformation can occur at the contact loca-
tion. Therefore caution is required when utilizing a soldering iron
during the soldering operation.
FLUX AND CLEANING
Rosin-based flux is recommended.
Cleaning Conditions
Solvent
Time
Please select the solvent of this product avoiding a strong
acid and a strong alkali, and considering the environments.
2min max.
Time(s)
IRON SOLDERING
Tip temperature
Heating time
Soldering rod specifications
300 to 350°C
3 sec/soldering
Output: 30W Tip diameter: 1mm
• Based on the above conditions, use a maximum product temperature of
260°C and a maximum accumulated heating time of 10 seconds as a
guideline.
• Please contact us for details.
• All specifications are subject to change without notice.