|
MZA3216 Datasheet, PDF (1/3 Pages) TDK Electronics – Chip Beads(SMD Array) For General Signal Line MZA Series MZA3216 Type | |||
|
(1/3)
Chip Beads(SMD Array)
For General Signal Line
MZA Series MZA3216 Type
FEATURES
⢠A single MZA series chip provides noise attenuation for four
lines, making it ideal for use with I/O lines of various highly
miniaturized.
⢠Electronic equipment, such as portable products, which
comprise high density circuitry.
⢠Low crosstalk between adjacent circuits.
⢠Internal electrodes feature low DC resistance, minimizing
wasteful power consumption.
⢠Electroplated terminal electrodes accommodate reflow
soldering.
⢠Monolithic structure ensures high reliability.
⢠The products contain no lead and also support lead-free
soldering.
⢠It is a product conforming to RoHS directive.
APPLICATIONS
High-frequency noise countermeasure in computers, printers,
VCRs, televisions, portable telephones, and other equipment.
PRODUCT IDENTIFICATION
MZA 3216 R 121 A T
(1) (2) (3) (4) (5) (6)
(1) Series name
(2) Dimensions LÃ W
(3) Material code
(4) Nominal impedance
121:120⦠at 100MHz
(5) Characteristic type
(6) Packaging style
T:Taping
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
250 to 260ËC
230ËC
10s max.
Natural
cooling
180ËC
150ËC
Preheating
60 to 120s
Time(s)
Soldering
30 to 60s
Conformity to RoHS Directive
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN (REFLOW SOLDERING)
3.2±0.2
Ferrite
Terminal
electrode
0.8±0.1
0.4±0.15
0.8
0.4
Weight: 20mg
Dimensions in mm
TEMPERATURE RANGES
Operating/storage
â55 to +125°C
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
4000 pieces/reel
HANDLING AND PRECAUTIONS
⢠Before soldering, be sure to preheat components. The preheat-
ing temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
⢠After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
⢠Do not expose the inductors to stray magnetic fields.
⢠Avoid static electricity discharge during handling.
⢠When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
⢠This product does not apply to flow soldering construction
method.
⢠Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
⢠Please contact our Sales office when your application are considered the following:
The deviceâs failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
⢠All specifications are subject to change without notice.
007-01 / 20071025 / e9421_mza.fm
|
▷ |