IBF12012A007V Datasheet, PDF (1/17 Pages) TDK Electronics – IBF Series – Non-isolated SMT Power Module

Advance Data Sheet: iBF Series – Non-isolated SMT Power Module
iBF Series DC/DC Power Modules
4.5-14V Input, 12A Output
Surface Mount Power Module
iBF power modules perform local voltage conversion from any bus
voltage in the 5V to 12V range. The iBF12012A007V utilizes a
low component count that results in both a low cost structure and
a high level of performance. The open-frame, compact, surface
mountable design features a low profile and weight as well as
additional edge plated pads that allow for extremely flexible and
robust manufacturing processes.
Features
• Size – 20.32mm x 11.43 mm x 8.5
mm (0.80 in. x 0.45 in. x 0.335 in.)
• DOSA Compatible Footprint
• Edge plated castellations for forming
inspectable solder joints
• Surface mountable
• Maximum weight 5.5g (0.194 oz)
• Up to 66W of output power in high
ambient temperature, low airflow
environments with no power derating
• Positive logic on/off
• Flexible Output Voltage Sequencing
• Starts with pre-biased output
• Output voltage adjustment – industry
standard
• Outstanding transient response
without the need for external loop
tuning components
• Constant switching frequency
• Remote Sense
• Power Good
• Full, auto-recovery protection:
o Input under voltage
o Short circuit
o Thermal limit
• ISO Certified manufacturing facilities
• Patent pending
Optional Features
• Negative logic on/off
• No output voltage sequencing
• Solder bumping for enhanced
solderability on the EPC footprint
©2010 TDK Innoveta Inc.
iBF12_Full_Datasheet_092010.doc 9/22/2010
℡ [phone]
1/17