|
IAF12020A007V Datasheet, PDF (1/18 Pages) TDK Electronics – iAF Series – Non-isolated SMT Power Module | |||
|
Advance Data Sheet: iAF Series â Non-isolated SMT Power Module
iAF Series DC/DC Power Modules
4.5-14V Input, 20A Output
Surface Mount Power Module
iAF power modules perform local voltage conversion from any bus
voltage in the 5V to 12V range. The iAF12020A007V utilizes a
low component count that results in both a low cost structure and
a high level of performance. The open-frame, compact, surface
mountable design features a low profile and weight as well as
additional edge plated pads that allow for extremely flexible and
robust manufacturing processes.
Features
⢠Size â 33mm x 13.46 mm x 7.75 mm
(1.3 in. x 0.53 in. x 0.305 in.)
⢠DOSA Compatible Footprint
⢠Edge plated castellations for forming
inspectable solder joints
⢠Surface mountable
⢠Maximum weight 5.5g (0.194 oz)
⢠Up to 110W of output power in high
ambient temperature, low airflow
environments with no power derating
⢠Positive logic on/off
⢠Flexible Output Voltage Sequencing
⢠Starts with pre-biased output
⢠Output voltage adjustment â industry
standard
⢠Outstanding transient response
without the need for external loop
tuning components
⢠Constant switching frequency
⢠Remote Sense
⢠Power Good
⢠Full, auto-recovery protection:
o Input under voltage
o Short circuit
o Thermal limit
⢠ISO Certified manufacturing facilities
⢠Patent pending
Optional Features
⢠Negative logic on/off
⢠No output voltage sequencing
⢠Solder bumping for enhanced
solderability on the EPC footprint
©2011 TDK Innoveta Inc.
iAF12_Full_Datasheet_08152011.doc 8/16/2011
â¡ (877) 498-0099
1/18
|
▷ |