English
Language : 

DPP120-24-1 Datasheet, PDF (1/2 Pages) TDK Electronics – 120W 240W DIN Rail Mount Power Supplies
DPP120-240 Series
120W & 240W DIN Rail Mount Power Supplies
Features
u Low Cost
u 12V, 24V or 48V Outputs
u Auto-ranging input (no manual switching)
u Parallel Function Switch
u -40(2) to +71°C Operation
Key Market Segments & Applications
Specifications
Model
DPP120-xx-1
DPP240-xx-1
AC Input Voltage range
VAC
93 - 132 / 186 - 264VAC, single phase. Auto select
Input Frequency
Hz
47 - 63Hz
DC Input Voltage range
VDC
210 - 370VDC
Inrush Current (115 / 230VAC)
A
24 / 48A
30 / 60A
Power Factor
-
Meets EN61000-3-2
Input Current (115 / 230VAC)
A
2.8 / 1.4A
5.4 / 2.2A
Output Voltage Accuracy
%
-0, +1% of Nominal
Line Regulation
%
±0.5%
Load Regulation
%
±1% (±5% when set in parallel mode)
Ripple and Noise (20MHz BW) mV
50mV
100mV
Overcurrent Protection (Typ)
-
110 - 145%
Overvoltage Protection
V
See model selector
Overtemperature Protection
-
-
Hold Up Time (230VAC input)
ms
> 30ms
Parallel operation
-
Set in parallel (droop) mode - maximum of 3 units
LED Indicators
-
Green LED = On, Red LED = DC Output Low
DC Good Relay (24V model only) -
0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V
Operating Temperature
-
-40(2) to +71°C (Derate linearly 2.5%/°C from 61 to 71°C)
Storage Temperature
°C
-40 to +85°C
Operating Humidity
-
20 - 95% RH (non condensing)
Cooling
(1) -
Convection
Withstand Voltage
-
Input to Output 3kVAC for 1 min.
Isolation Resistance
-
>100M at 25C & 70%RH, Output to Ground 500VDC
Vibration (Operating)
- IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min)
Shock (Operating)
-
IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face)
Safety Agency Approvals
-
UL508 Listed, UL60950-1, EN60950-1, CE
Conducted & Radiated EMI
-
EN55022 class B
EN55022 class A
Weight (Typ)
g
920
1000
Size (WxHxD)
(1) in
2.5 x 4.92 x 4.59”
3.27 x 4.92 x 4.57”
Case material
-
Metal
Warranty
yrs
Two years
(1) Recommend 1” clearance on all sides
(2) DPP120 -35°C
1-800-526-2324 • www.us.tdk-lambda.com/lp/
3