TMPG06-6.8 Datasheet, PDF (1/3 Pages) Shenzhen Taychipst Electronic Co., Ltd – Automotive Transient Voltage Suppressors

TMPG06-6.8/A THRU TMPG06-43/A
Automotive Transient Voltage Suppressors
6.8V-43V 1.0mA-10mA
FEATURES
• Patented PAR^® construction
• Available in Unidirectional polarity only
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Typical I_D less than 1.0 µA above 10 V rating
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
MECHANICAL DATA
Case: MPG06, molded epoxy over passivated junction
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
HE3 suffix for high reliability grade (AEC Q101
qualified)
Polarity: Color band denotes cathode end
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
UNIT
Peak power dissipation with a 10/1000 µs waveform ⁽¹⁾ (Fig. 1)
Peak pulse current with a 10/1000 µs waveform ^(1,2) (Fig. 3)
P_PPM
Minimum 400
W
I_PPM
see next table
A
Power dissipation on infinite heatsink at T_L = 75 °C (Fig. 5)
Peak forward surge current 8.3 ms single half sine-wave ⁽²⁾
Maximum instantaneous forward voltage at 25 A ⁽²⁾
P_D
1.0
W
I_FSM
40
A
V_F
3.5
V
Operating junction and storage temperature range
T_J, T_STG
- 65 to + 185
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
E-mail: [e-mail]
1 of 3
Web Site: www.taychipst.com