SRP600A Datasheet, PDF (1/2 Pages) General Semiconductor – FAST SWITCHING PLASTIC RECTIFIER

FAST SWITCHING PLASTIC RECTIFIER
SRP600A THRU SRP600K
50V-800V 6.0A
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ Construction utilizes void-free molded plastic technique
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Void-free molded package body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.07 ounce, 2.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
SRP
600A
SRP
600B
SRP
600D
SRP
600G
SRP
600J
Maximum repetitive peak reverse voltage
VRRM
50
100 200 400 600
Maximum RMS voltage
VRMS
35
70
140 280 420
Maximum DC blocking voltage
VDC
50
100 200 400 600
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
I(AV)
6.0
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
300.0
Maximum instantaneous forward voltage at 6.0A
VF
1.3
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
IR
10.0
1.0
Maximum reverse recovery time (NOTE 1)
trr
100 100 150 150
200
Typical junction capacitance (NOTE 2)
CJ
300.0
Typical thermal resistance (NOTE 3)
RΘJA
10.0
Operating junction temperature range
TJ
-50 to +125
Storage temperature range
TSTG
-50 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, with both leads equally to heat sink
SRP
600K UNITS
800 Volts
560 Volts
800 Volts
Amps
Amps
Volts
µA
mA
200 ns
pF
°C/W
°C
°C
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com