SMBJ5.0 Datasheet, PDF (1/3 Pages) Littelfuse – Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

SURFACE MOUNT TRANSIENT VOLTAGE RECTIFIERS
Features
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260^oC / 10 seconds at terminals
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10
x 1000 us waveform by 0.01% duty cycle
Mechanical Data
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band except
bipolar
Standard packaging: 12mm tape (EIA STD
RS-481)
Weight: 0.093gram
SMBJ5.0 THRU SMBJ170CA
600W
MAXIMUM RATINGS
Rating at Ta = 25 ?C ambient temperature unless otherwise specified.
Rating
Peak Pulse Power Dissipation on 10/1000µs (1)
waveform (Notes 1, 2, Fig. 3)
Peak Pulse Current on 10/1000µs
waveform (Note 1, Fig. 5)
Peak forward Surge Current
8.3 ms single half sine-wave superimposed on
rated load ( JEDEC Method )(Notes 2, 3)
Maximum Instantaneous Forward Voltage at 50A (Note 3,4 )
Operating Junction and Storage Temperature Range
Symbol
PPPM
IPPM
Value
Minimum 600
See Table
Units
Watts
Amps
VFM
TJ, TSTG
See Note 3, 4
- 65 to + 150
Volts
?C
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 ?C per Fig. 1
(2) Mounted on 5.0mm2 (0.013mm thick) land areas.
(3) Measured on 8.3ms. Single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
(4) VF=3.5V for SMBJ5.0 thru SMBJ90 devices and VF=5V for SMBJ100 thru SMBJ170 devices.
UPDATE : MAY 25, 2000
E-mail: [e-mail]
1 of 3
Web Site: www.taychipst.com