SBYV27-50 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Soft Recovery Ultrafast Plastic Rectifier

SBYV27-50 THRU SBYV27-200
Soft Recovery Ultrafast Plastic Rectifier
50V-200V 2.0A
FEATURES
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• Ideally suited for use in very high frequency switching
power supplies, inverters and as free wheeling diodes
• Ultrafast recovery time for high efficiency
• Excellent high temperature switching
• Soft recovery characteristics
• Glass passivated junction
• High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AC molded plastic body over
passivated chip
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbols SBYV27-50 SBYV27-100 SBYV27-150 SBYV27-200 Units
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
V
Maximum RMS voltage
VRMS
35
70
105
140
V
Maximum DC blocking voltage
VDC
50
100
150
200
V
Minimum reverse breakdown voltage at 100µA
VBR
55
110
165
220
V
Maximum average forward rectified current
0.375” (9.5mm) lead lengths at TL = 85ºC
IF(AV)
2.0
A
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load (JEDEC Method) at TJ = 150ºC ^IFSM
50
A
Typical thermal resistance (NOTE 1)
RΘJA
45
°C/W
Operating junction and storage temperature range
TJ, TSTG
-55 to +150°C
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbols SBYV27-50 SBYV27-100 SBYV27-150 SBYV27-200 Units
Maximum instantaneous forward
voltage at 3.0A (NOTE 2)
Maximum DC reverse current
at rated DC blocking voltage
TJ = 25°C
TJ = 150°C
VF
TA = 25°C
TA =100°C
IR
1.07
0.88
V
5.0
200
µA
Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A
trr
15
ns
Typical junction capacitance at 4.0V, 1MHz
CJ
15
pF
Notes:
(1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length
(2) Pulse test: 300µs pulse width, duty cycle ≤ 2%
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com