S5A Datasheet, PDF (1/2 Pages) Micro Commercial Components – 5 Amp Silicon Rectifier 50 to 1000 Volts

SURFACE MOUNT GLASS PASSIVATED RECTIFIER
FEATURES
! Glass Passivated Die Construction
! Ideally Suited for Automatic Assembly
! Low Forward Voltage Drop
! Surge Overload Rating to 100A Peak
! Low Power Loss
! Built-in Strain Relief
! Plastic Case Material has UL Flammability
Classification Rating 94V-O
S5A THRU S5M
50V-1000V 5.0A
Mechanical Data
! Case: SMC/DO-214AB, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.21 grams (approx.)
! Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
SYMBOLS S5A S5B S5D S5G S5J
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100 200 400 600
Maximum RMS Voltage
V_RMS
35
70 140 280 420
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600
Maximum Average Forward Rectified Current
at TL =100 (NOTE 3)
I_(AV)
5.0
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
I_FSM
100
rated load (JEDEC method) TL=100
Maximum Instantaneous Forward Voltage at 5.0A
V_F
1.15
Maximum DC Reverse Current
at rated DC Blocking Voltage
TA = 25
TA = 125
I_R
10.0
250
Typical Reverse Recovery Time (NOTE 1)
t_rr
2.5
Typical junction capacitance (NOTE 2)
C_J
60
Typical Thermal Resistance (NOTE 3)
R_θJL
47
R_θJA
13
Operating Junction and Storage Temperature Range T_J,T_STG
-55 to +150
Notes:
1. Reverse recovery test conditions: I_F =0.5A, I_R =1.0A, Irr =0.25A
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
3. Thermal resistance from Junction to ambient and from junction to lead mounted on
P.C.B.with 0.3×0.3″(8.0 × 8.0mm) copper pad areas.
S53K
800
560
800
S5M
1000
700
1000
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
A
s
pF
/W
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com