RS2A Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT FAST SWITCHING RECTIFIER

SURFACE MOUNT FAST RECOVERY RECTIFIERS
RS2A THRU RS2M
50V-1000V 2.0A
Features
For surface mounted application
Glass passivated junction chip
Built-in strain relief, ideal for automated
placement
Plastic material used carries Underwriters
Laboratory Classification 94V-O
Fast switching for high efficiency
High temperature soldering:
260℃/ 10 seconds at terminals
Mechanical Data
Cases: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Packing: 12mm tape per E1A STD RS-481
Weight: 0.093 gram
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
RS
2A
RS
2B
RS
2D
RS
2G
RS
2J
RS
2K
RS
2M
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
V_RRM 50 100 200 400 600 800 1000
V_RMS 35 70 140 280 420 560 700
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current
See Fig. 1 @TL=100^oC
I_(AV)
2.0
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
50
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 2.0A
V_F
1.3
Maximum DC Reverse Current
@ TA =25 ^oC at Rated DC Blocking
I_R
Voltage @ TA=125 ^oC
Maximum Reverse Recovery Time ( Note 1 )
Trr
5
200
150
250
500
Typical Junction Capacitance ( Note 2 )
Cj
50
Typical Thermal Resistance (Note 3)
R_θJA
55
R_θJL
18
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied VR=4.0 Volts
3. Thermal Resistance from Junction to Ambient and Junction to Lead Mounted on P.C.B. with
0.4” x 0.4” ( 10mm x 10 mm ) Copper Pad Areas.
Units
V
V
V
A
A
V
uA
uA
nS
pF
o_{C /W}
o_C
o_C
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com