RGP20A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER
RGP20A THRU RGP20MA
50V-1000V 2.0A
FEATURES
* GPRC (Glass Passivated Rectifier Chip) inside
* Glass passivated cavity-free junction
* Capable of meeting environmental standards of MIL-S-19500
* For use in high frequence rectifier circuits
* Fast switching for high efficiency
* 2.0 Amperes operation at TA=55^oC with no thermal runaway
* Typical IR less than 0.1uA
* High temperature soldering guaranteed: 260^oC/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
* Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
MECHANICAL DATA
Case : JEDEC DO-204AC molded plastic over glass body
Terminals : Plated axial leads , solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.015 ounes , 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature
unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length (SEE FIG.1)
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
RGP20
SYMBOLS
UNITS
A B D G J JA K KA M MA
VRRM
50 100 200 400 600 600 800 800 1000 1000 Volts
VRMS
35 70 140 280 420 420 560 560 700 700 Volts
VDC
50 100 200 400 600 600 800 800 1000 1000 Volts
I (AV)
2.0
Amps
IFSM
65
Amps
Maximum instantaneous forward voltage at 2.0 A
Maximum DC reverse current
at rated DC blocking voltage
TA=25^oC
TA=125^oC
TA=150^oC
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
VF
IR
trr
CJ
R JA
TJ,TSTG
1.3
Volts
5
30
uA
80
150
250 150 500 300 500 300 nS
35
pF
22
o_{C / W}
-65 to +175
o_C
NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted.
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com