RGP02-12E Datasheet, PDF (1/2 Pages) Vishay Siliconix – Glass Passivated Junction Fast Switching Rectifier

Glass Passivated JunctionFast Switching Rectifier
RGP02-12E THRU RGP02-20E
1200V-2000V 0.5A
FEATURES
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Capable of meeting environmental standards of
MIL-S-19500
• For use in high frequency rectifier circuits
• Fast switching for high efficiency
• Cavity-free glass passivated junction
• 0.5 Ampere operation at TA=55°C with no thermal
runaway
• Typical IR less than 0.2µA
• High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 oz., 0.3 g
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
RGP02 RGP02 RGP02 RGP02 RGP02
Symbols -12E
-14E
-16E
-18E
-20E Units
Maximum repetitive peak reverse voltage
VRRM
1200
1400
1600
1800
2000
V
Maximum RMS voltage
VRMS
840
980
1120 1260 1400
V
Maximum DC blocking voltage
VDC
1200 1400 1600 1800 2000
V
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
IF(AV)
0.5
A
Peak forward surge current
8.3ms single half sine-wave superimposed
IFSM
20
A
on rated load (JEDEC Method)
Typical thermal resistance ⁽¹⁾
RΘJA
RΘJL
65
30
°C/W
Operating junction and storage temperature range TJ, TSTG
-65 to +175
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Maximum instantaneous forward voltage at 0.1A
VF
1.8
V
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
IR
5.0
50
µA
Maximum reverse recovery time at
trr
IF=0.5A, IR=1.0A, Irr=0.25A
300
ns
Typical junction capacitance at 4.0V, 1MHz
CJ
5.0
pF
Note:
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com