P6KE Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

TRANSIENT VOLTAGE SUPPRESSORS

"
Features
l Economical series
l Available in both unidirectional and bidirectional construction
l 6.8 to 440 stand-off volts available
l 600 watts peak pulse power dissipation
Mechanical Characteristics
l CASE: Void free transfer molded thermosetting plastic
l FINISH: Silver plated copper readily solderable.
l POLARITY: Banded denotes cathode. Bidirectional not marked.
l WEIGHT: 0.7 Gram(Appx.).
l MOUNTING POSITION: Any.
Maximum Ratings
Peak Pulse Power Dissipation at 25^oC: 600Watts
Steady State Power Dissipatoin:5 Watts at T_L=+75^oC
3/8” Lead Length
t_clamping (0 Volts to BV Min.):
Unidirectional<1x10^-12 Seconds; Bidirectoinal<5x10^-S⁹ econds
Operating and Storage Temperature: -55^oC to +150^oC
APPLICATION
This TVS is an economical, molded, commercial product voltage-
sensitive components from destruction or partial degradation. The
response time of their clamping action is virtually instantaneous(
1X10^-12 seconds) and they have a peak pulse power rating of 600
watts for 1 ms as depicted in Figure 1 and 2. MCC also offers
various varieties of TVS to meet higher and lower power demands
and special applications.
NOTES:Forward Voltage (Vf)@!50 amps peak, 8.3 msec sine
wave equal to 3.5 volts max. (For unidirectional only)
For Bidirectional Construction, indicate a C or CA suffix
after part number,i.e.P6KE440CA.
Capacitance will be 1/2 that shown in Figure 4.
E-mail: [e-mail]
1 of 3
P6KE6.8 THRU P6KE440CA
600W
Web Site: www.taychipst.com