GP02-20 Datasheet, PDF (1/2 Pages) General Semiconductor – HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER

HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junctions
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
GP02-20 THRU GP02-40
2000V-4000V 0.25A
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS Voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed on rated load at:
(JEDEC Method)
TA=55°C
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current
at rated DC blocking voltage
TA= 25°C
TA=100°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
GP02
-20
2000
1400
2000
GP02
-25
2500
1750
2500
GP02
-30
3000
2100
3000
GP02
-35
3500
2450
3500
GP02
-40
4000
2800
4000
0.25
IFSM
VF
IR
trr
CJ
RΘJA
TJ, TSTG
15.0
3.0
5.0
50.0
2.0
3.0
130.0
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
µs
pF
°C/W
°C
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com