FR601G Datasheet, PDF (1/2 Pages) Jinan Gude Electronic Device – 6.0 AMPS. GLASS PASSIVATED FAST RECOVERY RECTIFIERS

GLASS PASSIVATED FAST RECOVERY RECTIFIERS
FEATURES
• Fast switching for high efficiency
• Glass passivated chip junction
• High current surge capability
• Low leakage
• High temperature soldering guaranteed
260 /10 seconds,0.375 (9.5mm)lead length at 5 lbs (2.3kg) tension
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL94V-0 rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
• Mounting position: Any
• Weight: 0.07 ounce, 2.0 gram
FR601G-FR607G
50V-1000V
6.0A
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FR FR FR FR FR FR FR} Units
601G 602G 603G 604G 605G 606G 607G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length
I_(AV)
6.0
A
@TA = 55 ^oC
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
250
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 6.0A
V_F
1.3
V
Maximum DC Reverse Current
@TA=25 ^oC at Rated DC Blocking Voltage
I_R
@ TA=125 ^oC
Maximum Reverse Recovery Time ( Note 1) Trr
5.0
uA
200
uA
150
250
500
nS
Typical Junction Capacitance ( Note 2 )
Cj
50
pF
Typical Thermal Resistance
R_θJA
30
Operating Temperature Range
TJ
-65 to +150
Storage Temperature Range
TSTG
-65 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B.
o_C/W
o_C
o_C
E-mail: [e-mail]
1 of 2
Web Site: www.taychipst.com