English
Language : 

CC2538 Datasheet, PDF (9/24 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – A Powerful System-On-Chip for 2.4-GHz IEEE 802.15.4, 6LoWPAN and ZigBee Applications
CC2538
www.ti.com
SWRS096A – DECEMBER 2012 – REVISED APRIL 2013
32-MHz CRYSTAL OSCILLATOR
Measured on Texas Instruments CC2538 EM reference design with TA = 25°C and VDD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Crystal frequency
32
MHz
Crystal frequency accuracy
requirement (1)
–40
40 ppm
ESR
Equivalent series resistance
6
16
60 Ω
C0
Crystal shunt capacitance
CL
Crystal load capacitance
Start-up time
1 1.9
10
13
0.3
7 pF
16 pF
ms
The crystal oscillator must be in power down for a
guard time before using it again. This requirement
Power-down guard time
is valid for all modes of operation. The need for
3
ms
power-down guard time can vary with crystal type
and load.
(1) Including aging and temperature dependency, as specified by [1]
32.768-kHz CRYSTAL OSCILLATOR
Measured on Texas Instruments CC2538 EM reference design with TA = 25°C and VDD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Crystal frequency
32.768
kHz
Crystal frequency accuracy
requirement (1)
–40
40 ppm
ESR
Equivalent series resistance
40 130 Ω
C0
Crystal shunt capacitance
CL
Crystal load capacitance
Start-up time
0.9
2 pF
12
16 pF
0.4
s
(1) Including aging and temperature dependency, as specified by [1]
32-kHz RC OSCILLATOR
Measured on Texas Instruments CC2538 EM reference design with TA = 25°C and VDD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Calibrated frequency(1)
32.753
kHz
Frequency accuracy after calibration
Temperature coefficient(2)
Supply-voltage coefficient(3)
Calibration time(4)
±0.2%
0.4
3
2
%/°C
%/V
ms
(1) The calibrated 32-kHz RC oscillator frequency is the 32-MHz XTAL frequency divided by 977.
(2) Frequency drift when temperature changes after calibration
(3) Frequency drift when supply voltage changes after calibration
(4) When the 32-kHz RC oscillator is enabled, it is calibrated when a switch from the 16-MHz RC oscillator to the 32-MHz crystal oscillator
is performed while SLEEPCMD.OSC32K_CALDIS is 0.***
Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: CC2538
Submit Documentation Feedback
9