DAC8562T Datasheet, PDF (4/14 Pages) Texas Instruments – DAC8562T Evaluation Module

EVM Overview
www.ti.com
1.3.4 Reference Voltage
The EVM includes an on-board reference as well as the option to provide an external reference voltage.
JP9 chooses between the on-board reference and the external reference. TP1 can be used to measure
the selected reference, which is the on-board reference by default.
1.4 EVM Default Hardware Setup
Table 2 lists the default jumper settings for the MMB0 modular EVM motherboard and Table 3 lists the
default jumper settings for the DAC8562TEVM.
Table 2. Default Jumper Settings for the MMB0
Modular EVM Motherboard
Jumper
J12
J13A
J13B
Position
CLOSED
OPEN
CLOSED
Table 3. Default Jumper Settings for the
DAC8562TEVM
Jumper
JP1
JP2
JP3
JP4
JP5
JP6
Position
OPEN
OPEN
2-3
2-3
2-3
2-3
Figure 1 illustrates the default jumper settings for the DAC8562TEVM.
Figure 1. Default Jumper Settings for the DAC8562TEVM
4
DAC8562T Evaluation Module
Copyright © 2015, Texas Instruments Incorporated
SLAU650 – October 2015
Submit Documentation Feedback