English
Language : 

TCS3103 Datasheet, PDF (3/12 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – LIGHT-TO-VOLTAGE COLOR SENSOR
TCS3103, TCS3104
LIGHT-TO-VOLTAGE COLOR SENSOR
TAOS108B − JULY 2010
Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 85°C
ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
Moisture sensitivity level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Solder conditions in accordance with JEDEC J−STD−020A, maximum temperature . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltages are with respect to GND.
Recommended Operating Conditions
Supply voltage, VDD
Operating free-air temperature, TA
Input low voltage on MFP pin, VIL
Input high voltage on MFP pin, VIH
Load capacitance, CL
VDD = 5 V
VDD = 5 V
VDD = 5 V
MIN NOM
4.5
5
−30
−0.5
3.5
MAX
5.5
70
1.5
5.5
100
UNIT
V
°C
V
V
pF
Electrical Characteristics VDD = 5 V, TA = 255C, RL = 10 kW (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
VD
VOM
IDD
Dark voltage, VOR, VOG, VOB
Maximum output voltage
Supply current
ReR Irradiance responsivity, VOR
ReG Irradiance responsivity, VOG
ReB Irradiance responsivity, VOB
Gain scaling, 1× to 2×
Gain scaling, 1× to 4×
Ee = 0
VDD = 5 V
VDD = 5 V, Ee = 0
λp = 470 nm, Gain select = 1×
λp = 524 nm, Gain select = 1×
λp = 640 nm, Gain select = 1×
λp = 470 nm, Gain select = 1×
λp = 524 nm, Gain select = 1×
λp = 640 nm, Gain select = 1×
λp = 470 nm, Gain select = 1×
λp = 524 nm, Gain select = 1×
λp = 640 nm, Gain select = 1×
0
4.8
0.3
0.18
0.15
1.9
3.8
270
0.02
0.09
0.4
0.13
0.25
0.06
0.2
0.13
0.12
2
4
10 mV
V
500
μA
mV/
(μW/cm2)
0.5
0.31
mV/
(μW/cm2)
0.25
mV/
(μW/cm2)
2.1
4.2
Tc
Temperature coefficient of output voltage
λp ≤ 700 nm, −30°C ≤ TA ≤ 70°C
± 360
ppm/°C
Dynamic Characteristics, VDD = 5 V, TA = 255C, RL = 10 kW (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Gain select = 1×
tr
Output pulse rise time, 10% to 90% of final value Gain select = 2×
Gain select = 4×
Gain select = 1×
tf
Output pulse fall time, 90% to 10% of final value
Gain select = 2×
Gain select = 4×
MIN TYP MAX
12
24
40
15
28
44
Integrated noise voltage
tPZX Propagation delay, output active
f = DC to 1 kHz, Ee = 0
VDD ramp 0 V to 5 V
200
50
UNIT
μs
μs
μs
μs
μs
μs
μVrms
ms
The LUMENOLOGY r Company
r
Copyright E 2010, TAOS Inc.
r
www.taosinc.com
3