TPA4411 Datasheet, PDF (1/30 Pages) Texas Instruments – 80-mW CAPLESS STEREO HEADPHONE DRIVER

www.ti.com
TPA4411
TPA4411M
SLOS430E – AUGUST 2004 – REVISED MARCH 2008
80-mW DIRECTPATH™ STEREO HEADPHONE DRIVER
FEATURES
1
•2 Space Saving Packages
– 20-Pin, 4 mm × 4 mm Thin QFN
– TPA4411 – Thermally Optimized
PowerPAD™ Package
– TPA4411M – Thermally Enhanced
PowerPAD™ Package
– 16-Ball, 2.18 mm × 2.18 mm WCSP
• Ground-Referenced Outputs Eliminate
DC-Bias Voltages on Headphone Ground Pin
– No Output DC-Blocking Capacitors
– Reduced Board Area
– Reduced Component Cost
– Improved THD+N Performance
– No Degradation of Low-Frequency
Response Due to Output Capacitors
• Wide Power Supply Range: 1.8 V to 4.5 V
• 80-mW/Ch Output Power into 16-Ω at 4.5 V
• Independent Right and Left Channel
Shutdown Control
• Short-Circuit and Thermal Protection
• Pop Reduction Circuitry
APPLICATIONS
• Notebook Computers
• CD / MP3 Players
• Smart Phones
• Cellular Phones
• PDAs
1
15
1
15
2
14
2
14
3
13
3
13
4
12
4
12
5
11
5
11
TPA4411RTJ
TPA4411MRTJ
A2 A3 A4
A1 ^{INR SGND PVDD C1P}
B1 SDR SDL NC PGND
C1 INL OUTR NC C1N
D1 ^{SVDD OUTL SVSS PVSS}
TPA4411YZH
DESCRIPTION
The TPA4411 and TPA4411M are stereo headphone
drivers designed to allow the removal of the output
DC-blocking capacitors for reduced component count
and cost. The TPA4411 and TPA4411M are ideal for
small portable electronics where size and cost are
critical design parameters.
The TPA4411 and TPA4411M are capable of driving
80 mW into a 16-Ω load at 4.5 V. Both TPA4411 and
TPA4411M have a fixed gain of –1.5 V/V and
headphone outputs that have ±8-kV IEC ESD
protection. The TPA4411 and TPA4411M have
independent shutdown control for the right and left
audio channels.
The TPA4411 is available in a 2.18 mm × 2.18 mm
WCSP and 4 mm × 4 mm Thin QFN packages. The
TPA4411M is available in a 4 mm × 4 mm Thin QFN
package. The TPA4411RTJ package is a thermally
optimized PowerPAD™ package allowing the
maximum amount of thermal dissipation and the
TPA4411MRTJ is a thermally enhanced PowerPAD
package designed to match competitive package
footprints.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD, DirectPath are trademarks of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2008, Texas Instruments Incorporated