LM46002EVM Datasheet, PDF (1/16 Pages) TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS – evaluation module (EVM) helps designers evaluate the operation

User's Guide
SNVU302 – March 2014
LM46002EVM User’s Guide
Introduction
The Texas Instruments LM46002EVM evaluation module (EVM) helps designers evaluate the operation
and performance of the LM46002 wide-input voltage Simple Switcher^® buck regulator. The device offers
configurability in a 1-V to 28-V output voltage, synchronous rectification and a 200-kHz to 2.2-MHz
adjustable frequency range. It also offers external frequency synchronization, power good (PG) flag, and a
precision enable to program undervoltage lockout (UVLO) and internal compensation. The LM46002EVM
is configured for an output voltage of 3.3 V and a switching frequency of 500 kHz. Refer to the LM46002
datasheet for additional features, detailed description and available options.
The EVM contains one DC-DC converter (See Table 1).
Table 1. Device and Package Configurations
CONVERTER
U1
IC
LM46002
PACKAGE
(PWP) HTSSOP-16
Setup
This section describes the test points and connectors on the EVM and how to properly connect, set up
and use the LM46002EVM. Please refer to Figure 1 for a top view of the EVM and relative placement of
the different test points and edge connector.
SNVU302 – March 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated
LM46002EVM User’s Guide
1