MA104.C.W.AB-.002 Datasheet, PDF (4/25 Pages) –

2. Specifications
Frequency
Impedance
VSWR
GPS Patch Gain
Axial ratio
Polarization
Out Band Rejection
Input Voltage
Total Gain @ Zenith
Current Consumption
Noise Figure
ELECTRICAL GPS
Min:1.8V
25dBic
6mA
2.7dB
1575.42MHz ± 1.023MHz
50 ohm
2.0 Max
-2.0dB Passive Gain @ Zenith | -1.0dBi Gain @ 10 degrees elevation
3.0 dB max
RHCP
fo = 1575.42MHz | fo ± 30 MHz 5dB Min.
fo ± 50 MHz 20dB Min. | fo ± 100 MHz 25dB Min.
Typ. 3.0V
30dBic
12mA
3.0dB
Max: 5.5V
32dBic
30mA
3.7dB
Dimensions
Casing
Base and thread
Thread diameter
Weather proof gasket
Cable pull
Recommended Mounting Torque
Maximum Mounting Torque
MECHANICAL
Height 28.5mm x Diameter 47.8mm
White PC
Nickel plated steel
18mm
DP-3060W foam with 3M9448HK double-side adhesive
8 Kgf
24.5N·m
29.4N·m
Waterproof
Corrosion
Temperature Range
Thermal Shock
Humidity
Shock (Drop Test)
ENVIRONMENTAL
IP-67 & IP-69K
5% NaCl for 96hrs - Nickel plated steel base and thread
-40°C to +85°C
100 cycles -40°C to +85°C
Non-condensing 65°C 95% RH
1m drop on concrete 6 axes
*Note: The return loss, efficiency and gain measurements in the above table, were taken for the antenna mounted on a
30x30 cm metal plate. For a specific case performance refers to the below plots.
SPE-13-8-043/C/SS | page 4 of 25
MA.104.C.W.A301111.B305111