FXP07070100A Datasheet, PDF (4/10 Pages) List of Unclassifed Manufacturers – Flexible PCB Penta Band GSM Antenna 100mm Ø1.13 cable IPEX connector

3.2 Mounting instructions and ground-plane connection
Peel back 3m paper. On the underside of the antenna is automotive grade 3m adhesive
(glue) for sticking the FXP.07 directly to plastic (e.g. housing). The antenna can be
curved around housing but should not be folded sharply
Ground connection - this small square
pad at the bottom of the FXP.07 can be
seen when paper is removed. This
should be connected to extra ground or
metal to increase efficiency (e.g. allow
pad to touch the side of a PCB like the
picture above
This is the antenna trace
or signal feed and should
be allowed to be free
from the PCB and
allowed to exist in free
area on non metal area
(plastic housing)_
SPE-11-8-114/C Page 4 of 10