RI.02.02.3000W Datasheet, PDF (2/12 Pages) Taoglas antenna solutions – UV and Vandal resistant PP housing

1. Introduction
Taoglas USA has designed a range of efficient antennas inside US standard raised non
reflective roadmarkers. These are designed for, and installed inside, the low profile “Bott’s
dots” that can to be mounted directly on the pavement and road in the USA.
These antennas exhibit remarkably high efficiencies in such small packages and live in a very
low profile enclosure. They are designed to be mounted directly on the road, pavement or
manhole cover, just like a standard roadmarker.
These antennas have been potted with the epoxy that is traditionally used to secure the
roadmarker itself to the ground. There are no air gaps whatsoever inside the new type
approved roadmarker with antenna, in order to maintain the mechanical integrity. It is
presumed that the standard black epoxy will also be used to install the roadmarker in its final
resting place on the ground.
The CAB.820 cable assembly is included so the antenna cable can be easily disconnected if
desired. This is useful when the antenna is mounted on a manhole cover. If the manhole
cover is lifted, the cable will split at the push-pull connectors, preventing damage to the
cable.
SPE-14-8-051/A/AS Page 2 of 12