FXUB71.A.07.C.001 Datasheet, PDF (2/22 Pages) Taoglas antenna solutions – 3M Adhesive Tape for Peel and Stick Mounting

1. Introduction
The patent pending FXUB71 antenna is an industry leading embedded LTE 2*2 MIMO
flexible polymer monopole type antenna for worldwide LTE applications, which also
works equally well on 2G and 3G applications. The antenna comes with a micro coax
cable and connector, and has good efficiency and isolation between ports, critical for
optimal LTE wireless performance.
Typical applications
- LTE Gateways and Routers
- High speed HD streaming
- LTE Access Points
- High capacity MIMO networks for Public Transportation
With over 40% efficiency on all bands, isolation performance between the two ports is
under -10dB in all bands. The antenna has been designed in a slim rectangular
form-factor, with its own automotive quality 3M 467 adhesive backing tape, to ensure
good isolation and convenient installation into typical M2M/IOT devices. Simply peel
and stick onto your plastic housing.
The antenna is tuned to work on a reference ABS plastic of 2mm of thickness which is
a common standard for most device plastics. Cable routing has been carefully planned
to ensure no cross-over of cable, and a logical and hassle free installation. Like all such
antennas, care should be taken to mount the antenna at least 10mm from metal
components or surfaces, and ideally 20mm for best radiation efficiency.
Before integration of the antenna in your device, especially if you require PTCRB or US
network approvals, please contact Taoglas regional sales office for technical support.
Cable length and connector type are fully customizable.
2. Specification
SPE-14-8-068/C/WY
Page 2 of 22