FXR.06.52.0075X.A.DG Datasheet, PDF (2/10 Pages) Taoglas antenna solutions – Layered with Ferrite Flux Director

1. Introduction
The FXR.06.52.0075X.A is an NFC Ferrite antenna on 75mm twisted pair 28AWG
cable with JST connector. It works with specific NFC chips which need to connect
via JST ACH connector.
NFC antennas can be applied in areas not traditionally available to other types of
antennas. A common example is the ability to apply NFC antennas to batteries or
other conductive surfaces. To enable this usage, however, a ferrite flux director
layer is required. This ferrite layer acts to steer the magnetic flux away from the
metal or other conductor, where it would otherwise result in loss or complete failure
to communicate. Taoglas NFC antennas can therefore be customized with flux
director layers to enable this flexibility in usage. The coil inductance noted below
can help estimate a capacitance value for creating resonance at 13.56MHz.
Typical applications
- Mobile devices
- Electronic wallets
- Health care ID scanners
- Payment readers
- Office ID
- Access control
- Internet Of Things
Customized antennas for specific applications, shape, and impedance match can also
be provided for an NRE and subject to MOQ. Contact your regional Taoglas sales
office for more information and support on our NFC antenna range.
SPE-15-8-074/A/CM Page 2 of 10