English
Language : 

FXP830.24.0100B Datasheet, PDF (2/14 Pages) Taoglas antenna solutions – Very High Efficiency
1. Introduction
The FXP830 has a peak gain of 1.8dBi at 2.4GHz and efficiencies of 50%, and 4-6dBi and
80-90% along bands 4.9GHz to 6GHz.
The FXP830 is a high efficiency, small, dual-band, dipole antenna for 2.4/4.9-6GHz band
including Bluetooth and Wi-Fi. This Taoglas patent pending antenna is unique in the
market because it is made from poly-flexible material, has a tiny form factor
(42*7*.01mm) and has double-sided 3M tape for easy “peel and stick” mounting.
The FXP830 is the ideal all-round antenna solution for squeezing into narrow spaces and
still maintaining high performance, for example at the top of LCD devices.
Many module manufacturers specify peak gain limits for any antennas that are to be
connected to that module. Those peak gain limits are based on free-space conditions. In
practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or
2dBi when put inside a device. So ideally you should go for a slightly higher peak gain
antenna than mentioned on the module specification to compensate for this effect,
giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate
layout, integration technique, or cable, Taoglas can make sure any of our antennas’ peak
gain will be below the peak gain limits. Taoglas can then issue a specification and/or
report for the selected antenna in your device that will clearly show it complying with the
peak gain limits, so you can be assured you are meeting regulatory requirements for
that module.
SPE-14-8-022/F/SS Page 2 of 14