FXP72070053A Datasheet, PDF (2/13 Pages) List of Unclassifed Manufacturers – FXP72 Freedom 2.4GHz Series Ground Coupled Antenna

1. Introduction
The FXP72 Freedom 2.4GHz Antenna works on WiFi, ZigBee, Bluetooth and ISM band at
2.4GHz. This antenna has been designed with a specific characteristic of having a ground
coupling effect in between the antenna and the device’s board, suitable for those devices
where there is no clearance in between the enclosure and the board, keeping the antenna
performance. The Antenna can be placed above or below of the device’s board, but
leaving the radiated elements of the antenna free of metal. This design can work on
different thickness and plastic materials. We have selected a piece of ABS plastic with 1.5
mm of thickness for testing.
Many module manufacturers specify peak gain limits for any antennas that are to be
connected to that module. Those peak gain limits are based on free-space conditions. In
practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or
2dBi when put inside a device. So ideally you should go for a slightly higher peak gain
antenna than mentioned on the module specification to compensate for this effect, giving
you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate
layout, integration technique, or cable, Taoglas can make sure any of our antennas’ peak
gain will be below the peak gain limits. Taoglas can then issue a specification and/or
report for the selected antenna in your device that will clearly show it complying with the
peak gain limits, so you can be assured you are meeting regulatory requirements for that
module.
SPE-12-8-012/D/ZL
Page 2 of 13