FXP543A07A001 Datasheet, PDF (2/21 Pages) Taoglas antenna solutions – Venti Circular 2.4/5.8GHz Flexible PCB Antenna

1. Introduction
The unique FXP543 Venti Circular antenna is the smallest 3-in-1 MIMO, internal
flexible monopole type antenna for WiFi 2.4/5.8GHz in the market Featuring a
thickness of only 0.15mm, the FXP543 is an ideal solution for gateways, routers, smart
city applications such as WiFi hot spots, smart lighting control, video surveillance and
traffic monitoring.
The FXP543 has over 45% efficiency in both the 2.4GHz and 5GHz bands. It has been
designed on a flexible material with a circular form-factor and cable connection for an
easy installation. Great care has been taken to have high isolation (at least 10dB)
between the three elements to ensure optimal MIMO system throughput.
The antenna comes with double-sided 3M adhesive for easy and robust "peel and
stick" mounting. Three cables terminate with IPEX (u.fl) connectors for easy
installation.
*If needed in order to comply with peak gain restrictions with certain wireless modules,
the antenna peak gain can be reduced by simply using longer cable, or when tested in
the actual device environment.
Many module manufacturers specify peak gain requirements for any antennas that is
to be connected to that module. Upon testing of any of our antenna with your device
and a selection of appropriate layout, integration technique, or cable, Taoglas can
make sure any of our antennas peak gain will be below the peak gain requirements.
Taoglas can then issue a specification and/or report for this selected WiFi antennas in
your device that will clearly show it complying with the peak gain requirements, so you
can be assured you are meeting regulatory requirements for that module.
DSP-15-8-SPE-15-8-047/A/SS Page 2 of 21